Order Submission Form
Get notified when the product is available again
DYKEM® STEEL BLUE® Layout Fluid is the go-to choice for professionals requiring a reliable, high-visibility marking fluid. Ideal for machine shop operators, this fluid produces a deep blue coating that allows for precise scribing, reduces glare, and highlights defects or pinholes on workpieces. Its ultra-thin film adds virtually no thickness to the surface and dries within minutes. Available in multiple packaging sizes, STEEL BLUE® fluid remains flexible, avoiding cracking or chipping over time. Safe for use on most surfaces and easily removable with DYKEM® Remover & Cleaner, this fluid is perfect for inspecting gear tooth contact patterns and various metalworking applications.
Key Features:
DYKEM® STEEL BLUE® Layout Fluid is a trusted tool for professionals seeking precision and speed in their marking and inspection tasks. Its deep blue color provides superior visibility, and its thin, durable film ensures that your workpiece remains unaffected by thickness or surface damage. With fast drying times and compatibility with most surfaces, DYKEM® STEEL BLUE® helps streamline your workflow while ensuring reliable, consistent results.
Key Features:
- Uniform deep blue color: Minimizes glare and reduces eye strain.
- Sharp, precise scribes: Creates clear, clean markings.
- Thin, durable film: Adds minimal thickness, resists cracking and chipping.
- Quick-drying: Dries in minutes, speeding up workflow.
- Reveals surface defects: Excellent for inspecting gear tooth contact patterns.
- Safe for most surfaces: Non-damaging and removable with DYKEM® Remover & Cleaner.
- Xylene-free: Contains no reportable amounts of Xylene.
- Compliance: Meets A-A 59168 dated May 21, 2014, excluding chemical resistance to chlorinated solvents.
- Metalworking and machining for scribing precise lines
- Inspection of gear tooth contact patterns
- Highlighting surface defects and pinholes in metals and other materials
- Use in aerospace industries, including compliance with Airbus Helicopters Specification ECA-L3194
- Ensure the surface is clean, dry, and free of oil or grease.
- Apply a thin, even layer of DYKEM® STEEL BLUE® Layout Fluid.
- Allow a few minutes for the fluid to dry before scribing or inspecting.
- Remove with DYKEM® Remover & Cleaner when necessary.
- Flammable: Keep away from heat, sparks, and open flames.
- Ventilation: Use in well-ventilated areas to avoid inhaling fumes.
- Contact: Avoid contact with skin and eyes; refer to the SDS for full safety instructions.
- Storage: Store in a cool, dry location. Shelf life of up to 3 years.
- Color: Blue
- Odor: Solvent
- Flash Point: 50°F (9.7°C)
- Boiling Point: 148°F (64.7°C)
- VOC Content: 94% - 96% by weight
- Dry Time: Less than 2 minutes
- Auto-Ignition Temperature: 716°F (380°C)
- Available Sizes: 12 oz aerosol, 2 oz felt tip applicator, 4 oz and 8 oz brush-in-cap, 930 mL bottle, 1 gallon bottle
DYKEM® STEEL BLUE® Layout Fluid is a trusted tool for professionals seeking precision and speed in their marking and inspection tasks. Its deep blue color provides superior visibility, and its thin, durable film ensures that your workpiece remains unaffected by thickness or surface damage. With fast drying times and compatibility with most surfaces, DYKEM® STEEL BLUE® helps streamline your workflow while ensuring reliable, consistent results.
Sub-Categories: Layout Fluids
Color: Blue
Odor: Solvent
Boiling Point / Range: 148°F (64.7°C)
Flash Point: 50°F (9.7°C)
Density: Bulk = 7.05 lb/gal; Aerosol = not determined
Auto-Ignition Temperature: 716°F (380°C)
VOC Content: 94% - 96% by weight
Shelf Life: 3 years
Dry Time: < 2 minutes (may vary depending on film thickness)
