The mixing ratio is always dependent on the type of spray application or dipping method. According to the desired flow behavior, the corresponding quantity of diluent is to be mixed with the concentrate.
For the spray application, a dilution with a ratio of 1: 1 is recommended, which results in a very good flow behavior at a low layer thickness.
For higher viewing thickness, a mixing ratio of 3 parts concentrate to 1 part thinner can be used.
Caution: Water-containing solvents and alcohols must not be used for dilution.
RemarkThe data in this information sheet are considered reliable. However, the content is without regard to the processing and application without legal liability, since these are not our influence. We reserve the right to make changes to the improvement.
The choice of materials for the maintenance of your equipment. Research of problems. Development of technical solutions.
Qualified technical support.
Deliveries of goods to anywhere in the UK.
You can see price and a product's in-store online availability.